Kerala PSC Assistant Engineer Syllabus 2020 | KPSC AE Exam Pattern, Preparation Tips


Kerala PSC Assistant Engineer Syllabus 2020 and exam pattern here on below of the page. Before getting to start the Kerala Public Service Commission KPSC Assistant Engineer exam preparation, aspirants should find the exact Kerala PSC Assistant Engineer syllabus and paper pattern which helps to score good grades in the exam. The official Kerala Public Service Commission KPSC has released the notification for Assistant Engineer Posts. Then don’t forget to download the Kerala PSC AE syllabus and paper pattern, respectively. For more detailed updates regarding the Kerala PSC Assistant Engineer examination keep in touch with this page to get more details about the examination.

Thank you for reading this post, don't forget to subscribe!

Kerala PSC Assistant Engineer Syllabus Pdf 

Hello eligible candidates for this exam, Do you interest to apply Kerala PSC Assistant Engineer recruitment? If Yes, check on the below page and download the necessary details of Kerala PSC Assistant Engineer Syllabus 2020 in the pdf format. Each applicant have dream to grab this opportunity with high marks in the written examination. Recent government exam results taught us that govt.  jobs have tough competition so that eligible candidates should download the latest Kerala PSC AE Syllabus and start preparing to crack the exam positively. To hunt this job, each aspirant must prepare all the subjects based on the Kerala PSC Assistant Engineer AE Syllabus 2020 and try to secure good marks.

Recruitment Information

Category Syllabus & Exam Pattern
No of vacancies 41
Official Board Kerala Public Service Commission
Name of Exam Assistant Engineer
Exam date Will be Soon
Official Website

Exam Pattern for KPSC Assistant Engineer

Contenders should prepare for their exams based on the subject highlighted below, who are willing to participate in the cross-check the test pattern once before and follow the official web portal to keep update. Very much clear on the selection process, which has been registered by where the candidates must be selected via written exam and interview procedure.

Topics Name  No of Questions Total Marks  Duration
Mechanics of Solids and Structural Analysis 100 100 1 hour 15 minutes
Building materials, Construction Technology, Construction Management
Environmental Engineering
      Design of Structures
Fluid Mechanics and Water Resources Engineering
Surveying and Levelling, Quantity Surveying and Valuation
Geotechnical Engineering
Transportation Engineering and Urban Planning
                          Total 100 100

Kerala PSC AE Syllabus 

Fluid Mechanics and Water Resources Engineering

Fluid Statics- Fluid pressure, Buoyancy, and floatation,
Fluid Kinematics,
Dynamics of fluid flow,
Flow-through orifice and notches,
Flow-through pipes,
Boundary layer,
Drag and Lift on immersed bodies.
Hydraulic machines- flow through veins (moving and stationary)
Impulse and reaction Turbines, Centrifugal Pumps,
Open channel flow, Uniform flow,
Hydraulic Jump, Gradually varied flow, Dimensional analysis, and model testing.
Hydrologic cycle, Precipitation, Infiltration, and Evaporation- measurement and data analysis.
Runoff-components and computation,
Hydrograph, Unit Hydrograph, and S-Hydrograph.
Irrigation types and methods-Soil water plant relationships,
Frequency of irrigation,
Computation of crop water requirement.
Streamflow measurement -Stage -discharge curve.
Meandering of rivers, river training works.
Surface water systems: diversion and storage systems, the reservoir – estimation of storage capacity and yield of reservoirs – reservoir sedimentation -useful life of a reservoir. Groundwater – Aquifer types and properties – Steady radial flow into a well.
Estimation of the yield of an open well.

Surveying and Levelling, Valuation, and Quantity Surveying

Surveying, Contouring, and Levelling. Area and Volume Computation, Levelling and Contouring
Global Positioning Systems, Geographical Information System, and Remote Sensing,
Theodolite Survey and Mass Diagram
Survey of Total Station and Electronic Distance Measurement
Rates Analysis – Databook and rate schedule
Rates for many work items and Detailed specification
Estimate Types
Bar bending schedules preparation for different RCC works
Detailed estimates of various items of works
Valuation- Depreciation,valuation methods, and rent fixation

Design of Structures

Analysis of reinforced rectangular beams
Shear strength of RC beam
Circular slabs simply supported, fixed as well as partially fixed subjected to udl
Design of water tanks, Design philosophy, and requirements
IS code recommendations and Prestressed concrete
Design of slender columns and Design of footings
Design of cantilever retaining wall with no surcharge
Design principles of counterfort retaining wall
Limit state method of design
Curtailment of reinforcement
Design for torsion, Continuous slab, and Design of one-way slab
Design of shear reinforcement, Bond and development length
Two-way slabs, Deflection, Cracking, and Limit state of serviceability
Columns subjected to compression, and biaxial bending
Concept of prestressing, materials and prestressing methods
Loss of prestress and Prestressing systems
Analysis of prestressed beams at service stages
Steel structures – Bolted as well as welded connections
Tension & Compression members, Beams, Purlins, Roof trusses
Timber structures – columns, and composite beams

Mechanics of Solids and Structural and Analysis

Concept of stress and strain
Bending moment as well as shear force
Deflection of beams
Stresses in beams
Theory of columns and Truss analysis
Statically indeterminate structures and Principle of virtual work
Moving loads and influence lines, Arches, and Strain Energy methods
Methods of Moment Distribution and Slope Deflection
Kani’s analysis method

Environmental Engineering

Water treatment methods
Quantity estimation, Water sources and its demand
Sludge digestion, Sludge drying bed
Forecasting of population and water quality
Disinfection methods
Process for Activated Sludge process and Trickling filter
Control of air pollutants
Air quality legislation
Oxygen sag curve and its treatment
Water distribution and Hardy Cross analysis method
Sewers designs
Design of treatment units- Sedimentation tank, Screening, and Grit chamber
Septic tanks, Imhoff tanks, Oxidation ponds, and Oxidation ditches
Upflow anaerobic sludge
Sources of Air pollution and their effects

Transportation Engineering and Urban Planning

Classification and alignment of highways
The geometric design of highways
CBR method of flexible pavement design
Construction and maintenance of pavements
Properties as well as testing the materials of pavement
Basic diagrams of traffic flow theory
Maintenance, and Design of tracks
Alignment, Ventilation and drainage of tunnels, Types of harbours and docks
Goals and objectives of planning
Design of runways, aprons, and taxiways
Traffic studies and analysis
Airport characteristics- Aircraft parts
Terminal area planning and selection of the site
Traffic regulation rules, Traffic safety, and Highway capacity
Theories of urbanization
Study of Urban Forms, Zoning
Development of new towns
Development Plan and the act of town planning
Components of Regional planning as well as planning

Geotechnical Engineering

Soil Shear characteristics
Classification and three-phase soil system
Consolidation and compaction
Soil permeability
Stability of finite slopes and various related methods
Ground improvement techniques
Stresses in subsoil
Theories of Rankine and Coulomb
Formula of Boussinesq, chart Lateral earth pressure of Newmark
Major soil deposits of India
Investigation of site and related tests
Soil bearing capacity
Design of shallow, deep and machine foundations

Building Materials, Construction Technology, Construction Management

Failures and Retrofitting of buildings, failures in Steel structures
Construction Planning and Scheduling, Construction disputes and settlement
Construction Materials – Structural steel, Timber, Mortar, Iron and Steel, and Modern materials
Concrete -Admixtures, Making of concrete, Mix proportioning
Building construction- Cost-effective construction, Masonry, Foundations, Lintels, and arches
Floors and flooring coverings, Doors, windows as well as ventilators, and Finishing works
Tall Buildings: Slip form construction, Steel and Concrete frame, and Prefabricated construction,
Principles of materials management
Vertical transportation Stairs, Elevators, Ramps, and Escalators,
Ethics in Construction, Construction safety
Quality management practices, Construction procedures.

KPSC AE Preparation Tips

We have to follow some strategy before appear in the written exam, which helps to crack this exam and finally to get qualified marks. Download the new syllabus and latest exam test pattern of Kerala PSC Assistant Engineer. Classify the syllabus on subject wise and its marks weightage provided by the officials. Set importance to all subjects and to get a weighted score in all subjects. Start preparing, revise several times with the help of old question papers and new exam pattern. Conduct a mock exam with your other applicants before appearing to the exam.

I felt, the above information will help you out with each eligible candidate for successful preparation. Keep follow the provided link to get updates in the released job notification. Congratulations to all applicants and appear the exam by following the instructions given by the Kerala PSC Assistant Engineer.

Time Management & Motivation Tips

One of the most important ways to prepare for exams is to practice with old papers of previous exams. Studying with a group of people or friends can greatly increase your marks both before and during your exams. Most of the time stress is a major factor that affects your exam.  Every job seekers, studies his books because he wants to get high marks in exam. Boost your preparation level and prepare with focus by simply. You can realise the importance of Exam, Completing the syllabus on time is important for success in the written / CBT examination. Candidates your performance levels to the top allowing you to clear the examination in the positive way. Get the subject wise important and high weighted topics one should go through their exam preparation. Practicing previous exam papers is a very important part of your examination.


Please enter your comment!
Please enter your name here